CRYORIG Introduces the Taku Kickstarter Campaign

CRYORIG, the PC Cooling and peripherals innovator is releasing their first PC case project the Taku on crowdfunding website Kickstarter. The Taku, first announced and exhibited last summer, will also be shown during Computex 2017. The Taku has been in development for over 2 Years in house, with over 6 months of co-development with manufacturing partner Lian Li. The Taku Kickstarter campaign begins on May 29th and ends on July 28th. Besides offering backers the chance to be the first people to receive the Taku, backers are also offered multiple customization options only available on Kickstarter.

The Taku is a hybrid between a PC Monitor Stand and a high-end ITX form factor PC case. With the Taku, the PC footprint is minimized to free up desk space while at the same time fitting a high-performance PC system. The benefit of this design is that the monitor, keyboard and the full PC system is arranged vertically on top of each other. Meaning the total footprint is lowered, and valuable deskspace is freed. The Taku is compatible with GPU’s up to 280mm, ITX form factor mainboards, SFX or SFX-L power supplies, fully capable of housing a high-end Gaming PC. Taku’s storage space is also well taken care of. The Taku can also fit 1x 3.5” HDD, two 2.5” SSD/HDD.

As a PC Monitor Stand the Taku can support monitors up to 15 kg and fit a full 104 key mechanical keyboard underneath the stand. The system tray can be fully slid out of the chassis for easy installation of PC components or upgrades. On the left side of the Taku you’ll find dual USB 3.0 ports and audio in/out ports. A USB-Type C port will be made available in later revisions. The Taku will also include two cable management holes at the front. This allows for cables to be run through the system tray and connected to the back ports of the Taku. Providing easy and clean cable management of USB charging lines for your phone or peripheral.

With the Taku, CRYORIG combines wood and aluminum to create an organic feeling piece of Technology that would fit perfectly into any home, or work environment. The Taku campaign will begin on May 29th and offer multiple colors and material options for users to mix and match. Early bird backers will be able to get the Taku at USD$ 250 (-VAT,-shipping) with standard Taku Classics going up to USD$ 299(-VAT,-shipping), the custom Taku PE’s cost will depend on customization options. First shipments of the Taku will got out to backers beginning in September. An additional C7 will be added free if the Taku campaign reaches 1,000 units backed.


Case Dimensions (H x W x D): 142 x 570 x 310 mm
Weight: 5.3 kg
Motherboard support: Mini-ITX
Power Supply support: SFX, SFX-L
Drives: 1 x 3.5” HDD and 2 x 2.5" HDD/SSD
Front ports: 2 x USB 3.0 (internal 20pin plug) and 3.5mm Audio in/out ports.
Power button: Premium-grade button
Material: 2mm aluminum, anodized sandblasted exterior
Colors: Anodized black or silver exterior, matte black painted
Internal Lian-Li PCI-E 3.0 x16 compatible Riser Card
PSU- 24pin and 8pin extension cable included
92mm System Fan included


CPU Coolers
- Note: Some heatsinks will also fit if used with a thinner fan
- Max. height 48mm

Hard Disk Drives
- 2 x 2.5" HDD/SSD in drive bay
- 1 x 3.5" HDD/SSD in drive bay

Graphics Card
- Max. Width: From bottom of PCI-E slot to top: 134mm
- Max. Height: 40mm (Dual Slot PCI-E)
- Max. Length: 280mm

- Mini-ITX

Power Supply
- SFX and SFX-L

Memory Max. Height
- 52mm